|
|
|
|
|
|
|
|
|
|
ST Titanium cartridge | | |
|
|
Titanium cartridge (including tubular and plate type) is made by the raw material industrial high-purity titanium powder (99.4%), which is first screened, cooled and molded under static pressure, and is then sintered at a high temperature and high vacuum. Thus, the titanium cartridge with its high-tech materials composition and special molding process has unique and excellent performance:
1. uniform structure, narrow distribution of pore size and high-efficiency separation
2. High porosity, small filtration resistance, and high-efficiency penetration
3.High temperature resistance, generally in normal use below 280 degrees
4. Good chemical stability, acid and alkali resistance, with oxidation resistance
5. With no particle shedding, no raw liquor formed into secondary pollution, in line with the requirements of food hygiene and pharmaceutical GMP
6. Good mechanical properties, filter pressing and extraction filtration, simple operation
7. Low differential pressure, small size, and large flow
8. Strong anti-microbial capacity, and not reacting with micro-organisms
9. Nice molding process, the overall welding-free length of up to 1000mm
10. Online regeneration, easy to clean, with a long service life |
|
Cartridge parameters
Filtration precision: 0.2um-100um
Porosity :28-50%
Permeability :0.02-20M3cm /m2h.mmH2O
Compressive strength :0.5-1 .5 Mpa
Temperature: 280°C (wet)
Maximum working differential pressure: 0.6Mpa
|
|
Specification/Model
Diameter: Φ22mm Φ30mm Φ50mm Φ60mm Φ80mm Φ100mm Φ120mm
Length: 5 inches (125mm) 10 inches (250mm)
12 inches (300mm) 20 inches (500mm) 30 inches (750mm) to 40 inches (1000mm)
Interface type: M20 interface M30 interface 222 interface 226 interface
Filtration precision: 0.22 microns, 0.45 microns, 1 micron, 3 microns, 5 microns, 10 microns, 20 microns, 30 microns, 50 microns, 80 microns and 100 microns
|
|
|
| | [Back] [Print] |
|
|
|
|
|
|
|
|
|
|