|
|
|
|
|
|
|
|
|
|
Automatic scraper cleaning filter | | |
YNTSH-SX2 series mechanical scraper self-cleaning filter (referred to as the scraper filter) works as follows: the liquid flows from the filter inlet, from up to down and into the outlet of the filter through the cartridge surface; when a certain amount of impurities is collected on the cartridge surface the motor drives the scraper equipped with a corrector to turn close to the cartridge surface, scraping the impurities, and the impurities are gathered at the bottom of the container with the downstream liquid; when a certain amount of impurities is accumulated, the automatic drain valve is open and the collection chamber discharges the liquid containing a high concentration of impurities. The discharged residue liquid is recyclable or discharged.
DX series filter is sub-classified into three sub-series: DX1 inner scraper type, namely, a scraper inside the filter screen; DX2 outer scraper type, namely, a scraper outside the filter; DX3 series means a cylinder drives the scraper to scrape impurities from up to down, and it is suitable for general viscosity liquid filtration and high-precision filtration, with the most efficient cleaning and scraping effect; |
|
|
|
Technical features |
|
Automatic online continuous filtration >>>>> reduce labor costs, in line with factory automation operation requirements
No disposable filter supplies to be abandoned >>>>> save material costs and environmental processing costs
Extremely small filter pressure loss and stable flow >>>>>
Fully enclosed filter >>>>>
Emissions from waste high impurity concentration and recyclable >>>>> avoid the loss of high-value materials
A combination of a variety of modules and automation mode >>>>> |
|
Materials of parts |
|
The main body of the filter CS\stainless steel SS304.\SS316L tolerance to acid-base fluid corrosion, SS316L better performance
Filter screen Stainless steel SS304/SS316L
Drive shaft seal PTFE polytetrafluoroethylene, applicable to various types of solvents and acid-base liquids, with a maximum working temperature of 230℃
Seal ring NBR nitrile rubber buna, suitable for most of neutral and oily liquids, with a maximum working temperature of 120°C
VITON Tolerance to acid-base liquids and the majority of solvents, with a maximum working temperature of 230°C
Scraper S2-type ultra-resistant synthetic material; S3-type wear-resistant stainless steel scraper
Tripod Stainless steel SS304 |
|
| | [Back] [Print] |
|
|
|
|
|
|
|
|
|
|